CASEA sites

In the picture with a single click. Find out more about our company locations, offers and contact options.

CASEA sites


Standorte REMONDIS-Gruppe

CASEA is part of the REMONDIS Group, meaning it is part of an international recycling, services and water company with about 800 locations in over 30 countries.

REMONDIS Group sites

Calcium sulphate-self-levelling screed – for discerning floors

The special formulation of our calcium sulphate self-levelling screeds (CAF) ensures excellent flow properties, which makes them particularly suitable for demanding areas of application. Even large and geometrically complicated surfaces can be produced quickly, easily and seamlessly. In addition to saving time during processing, our calcium sulphate self-levelling screeds also harden very quickly. On surfaces can be walked on the very next day in order to ventilate the room or carry out minor finishing work. Long delays in construction progress due to laying screed are now consigned to the past forever.

Calcium sulphate self-levelling screed is – as the name suggests – produced with binders and additives based on calcium sulphate. This results in the best processing and working properties.

Calcium sulphate-self-levelling screed – advantages at a glance

No unevenness

The self-levelling screed does not need compacting, abrading or smoothing. Different layer thicknesses are also not a problem.

Low weight

As a lightweight screed, ideal for wooden beam ceilings or retrospective attic insulation in old buildings.

Perfect as a heated screed

Heated screeds based on calcium sulphate can be heated up after just one week. Cement screed take three times this long.

Material and money-saving

Calcium sulphate self-levelling screed from CASEA is dimensionally stable and resistant, which allows a minimum screed thickness.

Sustainability guaranteed

Nothing other than calcium sulphate – for example gravel or quartz sand – is added. This makes the screed perfectly recyclable.

Calcium sulphate self-levelling screed and underfloor heating – they go together. Due to its especially fine grain, the screed fills gaps perfectly

Our calcium sulphate self-levelling screed product portfolio

We offer our calcium sulphate self-levelling screed in a number of formulations – always tailored exactly to the field of use. During production, we use digital weighing techniques to ensure that all components are one hundred percent correct. Here is an overview of the individual products including specifications and safety data sheets.

casufloor C25/F5 – calcium sulphate self-levelling screed

Specifications
Specifications 
Class CA-C25-F4 according to DIN EN 13813
Area of application Residential and office construction, interior
Grain sizeUp to approx. 2 mm
Layer thicknessFrom 30 mm
Can be walked on after Approx. 24 hours
Load bearing  After 1 week**
Yield*Approx. 550 l/t approx. 12.5 m² at 40 mm layer thickness
Material requirements*Approx. 18 kg/m² per 10 mm layer thickness
Container sizes40 kg sack, silo

* Information calculated in the lab using the same conditions in each case. There may be deviations in practice.
** Depending on room climate   


casufloor C30/F6 – calcium sulphate self-levelling screed

Specifications
Specifications 
Class CA-C30-F6 according to DIN EN 13813
Area of application Residential and office construction, interior
Grain sizeUp to approx. 2 mm
Layer thicknessFrom 30 mm
Can be walked on after Approx. 24 hours
Load bearing  After 1 week**
Yield*Approx. 550 l/t approx. 12.5 m² at 40 mm layer thickness
Material requirements*Approx. 18 kg/m² per 10 mm layer thickness
Container sizes40 kg sack, silo on request

* Information calculated in the lab using the same conditions in each case. There may be deviations in practice.
** Depending on room climate   


casufloor DE – calcium sulphate thin-layer flowing screed

Specifications
Specifications 
Class CA-C30-F7 according to DIN EN 13813
Area of application Residential and office construction, interior, including thin-layered underfloor heating
Grain sizeUp to approx. 2 mm
Layer thicknessFrom 10-35 mm
Can be walked on after Approx. 24 hours
Load bearing  After 1 week**
Yield*Approx. 550 l/t approx. 25 m² at 20 mm layer thickness
Material requirements*Approx. 18 kg/m² per 10 mm layer thickness
Container sizes25 kg sack, silo

* Information calculated in the lab using the same conditions in each case. There may be deviations in practice.
** Depending on room climate   

Order quickly and easily by E-Mail. If you have any questions, please feel free to call us on: +49 36332 89100

CASEA GmbH // A company of the REMONDIS Group