Fulfils DIN 13813
In the picture with a single click. Find out more about our company locations, offers and contact options.
Regardless of whether it is a new building or renovation - our cement-based floor levelling compound impresses both in terms of processing and productivity. An average of just 1.6 kilograms is required per square metre and millimetre of layer thickness. Unfinished floors can be transformed into absolutely flat surfaces with the greatest precision, without much effort. The same applies if, in the course of a floor renovation, the old flooring has to be removed and the foundation levelled and prepared for the new flooring. Due to its versatility and easy handling, our cement-based floor levelling compound is used in both the professional and DIY sectors. It's nice when quality is so easy to achieve.
Fulfils DIN 13813
Our cement-based floor levelling compound according to DIN 13813 is suitable as a bond leveller on raw concrete ceilings and cement-based screeds
In addition to cement, our cement-based floor levelling compound almost exclusively contains mineral aggregates. The proportion of other additives is minimal and is in the per thousand range. This is noticeable in the extraordinarily good product and processing properties, which impress everyone from renovators to tilers and floorer and interior decorators.
Smooths very well
Hydraulically quick setting
Suitable for chair castors
For layer thicknesses of 1.5 to 20 millimetres
|Class||CT-C25-F5 according to DIN EN 13813|
|Area of application||Interior|
|Grain size||Up to approx. 0.5 mm|
|Layer thickness||Up to 20 mm|
|Can be walked on after||Approx. 3 hours|
|Load-bearing||After approx. 28 days**|
|Yield*||Approx. 625 l/t|
|Material requirements*||Approx. 1.6 kg/m2 per 1 mm layer thickness|
|Container sizes||25 kg sack, silo|
* Information calculated in the lab using the same conditions in each case. There may be deviations in practice.
** Depending on room climate